Walnut, like other “furniture woods”, was prized as much in the 1800’s as it is today. Therefore, not many structures used Walnut, unless there was an abundance of the trees nearby the site. This makes reclaimed Walnut one of the rarest woods we reclaim.
Reclaimed Walnut offers a beautiful rich coffee color, offset by caramels & tans. The swirling grain patterns mix with the occasional dark knots, nail holes, and mineral stains to create a stunning one of a kind floor.
3 – 6" Mid Planks
7 – 9" Wide Planks
10" Wide Planks
|Lengths||18" – 12'|
4 – 6"
6 - 10"
|Lengths||1 – 8'
|Low Traffic||High Traffic|
Our reclaimed Walnut is sourced from agricultural buildings throughout the USA. Go to Unearth the Story to read more about history of our antique and reclaimed wood.
Our products are made here in the USA, in a way that’s healthy for you, our employees, and the environment. The 13-acre NY facility is 100% wind powered. Our mill and kilns are heated 100% with our scrap wood. Pioneer Millworks is FSC chain of custody certified in three categories and Green America approved. All of our products are LEED points eligible. Be sure to visit our Earth Shared for details.
Most of our solid and eco-friendly engineered flooring is available unfinished or prefinished. Prefinish includes tung oil or aluminum oxide and requires a micro bevel on each piece of flooring. The prefinish process used is performed on patented equipment in a state-of-the-art facility. Great care is taken in milling the boards so that the finish can be applied uniformly, and an extra four-stage sanding process ensures a smooth surface. The actual finish is a seven stage process which uses extremely hard resins. How hard? Well, so hard that normal sandpaper can’t be used on the production line, which admittedly is a drawback should you ever feel the need to refinish your floor. In order to ensure durability and long service life, we use about 25% more resins than conventional prefinished flooring.
Our solid flooring features precision milled tongue and groove that can be nailed or stapled down. The World's Most Eco-Friendly Engineered flooring is entirely tongue and groove including end matching. It can be nailed, stapled, glued down or floated.
Already have this floor? Send us a note and photo, we'll post it.
SQUARE FOOTAGE CALCULATOR:
Don’t worry, you don’t have to revisit middle school math to figure out how much flooring you’ll need – we make it easy!
Flooring, wall paneling, and ceilings are typically ordered by the square foot. To calculate how much you'll need, enter the width & length of the area you’re working on. If your room has an odd shape, enter in the width & length of each area and add them up. Our calculator adds 7% overage to allow for trimming & cutting on the job site. Some overage should be as high as 12%, depending on the project. Our wood experts can help you determine just how much to order.
Your order will be shipped via common carrier in most cases, which allows us to get the best shipping rates possible for you. Orders of flooring, lumber, and millwork are packaged in small “hand-bundles” that can be picked up by one or two people, and then stacked on a larger skid. We then wrap your order in lumber wrap, and shrink wrap the ends of the skid for maximum weather protection.
Unloading your material from a truck is quite easy with some extra helpers on hand. The wood comes bundled in manageable sections that in most cases one person can carry at least one bundle.
Since each order is different, it is difficult to estimate a typical freight cost, however If you’d like some ideas of the shipping cost for your order, please give us a call.
WOOD FLOORING QUALITY GUARANTEE:
All of Pioneer Millworks wood floors are custom-crafted to the highest standards. Each plank goes through numerous inspections for quality of grading & milling throughout the manufacturing process. We urge you and your installer to inspect your flooring prior to installation. If you are not 100% satisfied with your flooring, please contact us prior to any cutting, nailing, or installation and we will replace any materials which do not meet the grade specifications and information on your signed order confirmation. We reserve the right to require photographs of, or the return of, any material in question prior to the release of replacement flooring. Pioneer Millworks will not accept returns of, or replace, any materials which have been cut or installed once leaving our shop, or damaged in return transit due to improper or insufficient packaging.
WOOD FLOORING & LUMBER WARRANTY:
Pioneer Millworks warrants to the original purchaser that the flooring and/or lumber materials provided by us will be per the specifications set forth on our Grade Specifications and your signed order confirmation. All materials will be kiln-dried to an average moisture content of 6% to 9% at the time of shipment from our plant. Flooring and other materials that are kiln-dried will be free of insect infestation at the time of shipment from our plant.
PRE-FINISHED FLOORING WARRANTY:
Pioneer Millworks warrants that our factory-applied UV-cured Aluminum Oxide finish will not separate for a full 20 years from the original date of purchase. This warranty does not apply to other types of finishes applied by Pioneer Millworks. This warranty is non-transferrable.
ENGINEERED FLOORING WARRANTY:
Pioneer Millworks warrants to the original purchaser that the wear layer will not separate from the platform for the lifetime of the floor under normal use and conditions.
EXCLUSIONS TO THE ABOVE WARRANTIES:
TERMS AND CONDITIONS
Pioneer Millworks has created various grades and descriptions to quantify as best we can the board stock and finished product ordered. Due to the quirkiness and variability of our sources, these descriptions are very good, but not perfect guidelines. For this reason, we request that our customers review and agree to our terms and conditions. View them here.
Still have questions? Send us an email.